TASCAM HS-P82
3
HS-P82
Release Notes
folder are still yellow, but the folder icons of all other
folders have been changed to grey.
When starting recording while a pop-up message was
•
still displayed, the time counter would not move. This
has been fixed.
Marks could not be added to WAV files that were not
•
created by this unit. This has been fixed.
Some mark information could not be read. This has
•
been fixed.
The WAV bext chunk size had 2 bytes more than the
•
standard size. This has been fixed.
When the selected media was changed, the phantom
•
power setting would not match the setting shown on
screen in some cases. This has been fixed.
If there were numerous files in the root directory of a
•
CF card, firmware update files would not be shown.
This has been fixed.
Operation stability has been improved.
•
V1.04 fixes
On the
•
Mark List
screen, if you changed a CF card
while a mark was selected, editing the mark points
could not be conducted. This has been fixed.
The last added
•
MANUAL MARK
could not be cleared in
some cases. This has been fixed.
The
•
CREATE PROJECT
button did not function in
some cases. This has been fixed.
When creating a new folder, the automatically
•
displayed folder name was incorrect in some cases. This
has been fixed.
Pressing and holding a front panel key while starting
•
up could cause the unit to hang occasionally. This has
been fixed.
When creating a project, if you designated a name
•
that already existed on the CF card, a warning was not
displayed in some cases and the
CREATE PROJECT
button did not function. This has been fixed.
When using a PS/2 keyboard to change the single
•
character used in the second half of the
Next Take
Name
, the backspace and delete keys could erase that
character to make the field erroneously blank. This has
been fixed.
On the
•
Sync TC
screen, even if the frequency was
correct, 44.1 kHz was not properly shown. This has
been fixed.
When editing the name of a project that did not
•
contain folders, the pop-up window would disappear.
This has been fixed.
If an error occurred when formatting of a CF card, an
•
error message was not shown. Now a message will be
shown.
Copying between folders that had different sampling
•
frequency settings was allowed mistakenly. This is now
prevented.
If time code was displayed, when that playback was
•
stopped the playback starting point time code was
mistakenly displayed momentarily. This has been fixed.
V1.03 fixes
The adjustment curve for the
•
2Mix LVL
(level sent to
the stereo bus) of the internal mixer has been changed.
Some of the information stored in BWF files (timestamp
•
information in iXML chunks) had been erroneous. This
has been fixed.
After canceling the copying of a folder, folder deletion
•
and other operations would not complete properly.
This has been fixed.
When playing back after recording or skipping takes,
•
a time that differed from the playback time would be
momentarily output from the TIMECODE/DIGITAL
OUT (OUT 1) connector. This has been fixed.
A noise would be output if a take was searched forward
•
until its end. This has been fixed.
When using the
•
NEXT TAKE NAME
button pull-up on
the home screen, the “UserWord” would not be saved
in rare cases. This has been fixed.
On the
•
PROJECT
Screen, the Fs value would be shown
inaccurately on rare occasions. This has been fixed.
When searching forward or backward, it would not be
•
possible to stop searching at the time when switching
from one take to another. This has been fixed.
When an even-numbered channel was soloed, turning
•
on the channel link for that channel would make it
impossible to disable the solo mode. This has been
fixed.
Locating to marks has been improved.
•
Incorrect data was output from the timecode generator
•
on rare occasions. This has been fixed.
The inputs timecode would not be updated on very
•
rare occasions. This has been fixed.
Using a PS/2 keyboard, Inputting characters prohibited
•
by FAT file systems was possible. This has been fixed.
When inserting a CF card that did not contain a project,
•
trouble would occur on rare occasions. This has been
fixed.
Issues related to the use of the touch panel have been
•
fixed.
When the
•
File Mode
item on the
REC SETUP
screen
was set to
MONO
or
POLY
(with the recording function
on for only 1 channel) and the
LR 2MIX
record
function was turned ON, recording could exceed the
MAX File Size
setting. This has been fixed.
