2
TASCAM HD-R1
V1.01 additions
HD-P2 Compact Flash media can now be used for
•
playback. “H” appears on the LCD screen when such
media is in use.
If a track that does not exist is selected using direct
•
play (from an RC-SS20), the unit stops.
Maintenance items
When transmitting multiple tracks using FTP over LAN
<
with a “Static” address, the set IP address would be
changed automatically. This problem has been fixed.
The internal clock would become significantly
<
inaccurate. This problem has been fixed.
The meter peak hold function did not work properly
<
sometimes. This problem has been fixed.
The following problems related to serial control have
<
been fixed.
The wrong track number would be returned during
•
recording.
The Playlist Name command did not function.
•
During MP3 recording, the amount of recording space
<
displayed would be significantly inaccurate sometimes.
This problem has been fixed.
If
<
“Auto Cue” was set to “–24dBFS” and the “Ducking”
Threshold value was set to “–18dBFS”or “–12dBFS”
noise sometimes occurred when ducking began. This
problem has been fixed.
“Auto Cue”
<
would function incorrectly with tracks
of no more than one second. This problem has been
fixed.
The name of the file being recorded is now shown
<
even during ready-to-record state.
If you tried to start the HD-R1 while sending a serial
<
command, the unit would freeze. This problem has
been fixed.
During startup, the internal clock would be several
<
seconds late. This problem has been fixed.
Even if the remaining recording time exceeded
<
99:59:59.99, the minutes and smaller units would still
change. This problem has been fixed.
V1.10 changes
When track names are updated on a Compact Flash
•
card, the list of the track names on the card is sorted
again.
An error that occurred in moving the minutes when
•
setting the time with the shuttle wheel has been fixed.
A message now appears when the number of tracks in
•
a folder reaches 1023.
An error that occurred in which the remaining time of
•
the track was mistakenly shown based on the sampling
rate of the previous track after using the
SKIP
key
or otherwise switching to a track with a different
sampling rate has been fixed.
A problem in which S/PDIF signals could not be
•
received after “
Media full
” messages has been
fixed.
A problem in which Network settings were not
•
changed even when the
ENTER
key had been pushed
has been fixed.
A problem in which tracks uploaded by FTP would play
•
early or late
has been fixed.
The problem in which the Playlist menu Delay Interval
•
option did not function has been fixed.
The timeout time using serial control has been
•
eliminated. Telnet Control has a 900-second timeout.
A problem in which the unit would stop when
•
transferring 50 megabytes of data or more by FTP has
been fixed.
A problem in which the beginning of the track’s sound
•
would be played back after single mode playback has
been fixed.
A problem in which the R output did not change even
•
when the reference level (“Ref Level”) was changed has
been fixed.
When in a PLAY READY state, the sampling rate of the
•
unit now changes to that of the current track.
It is now possible to press the
•
CURRENT
+
SKIP
keys
as a shortcut to move to the top directory.
The FTP Transmission speed has been accelerated.
•
By accelerating recording processing, the writing time
•
that had been required when turning prerecording ON
during Sync recording has been reduced.
Windows Media Player WAV Files can now be played
•
back.
V1.01 changes
HD-R1
Release Notes