2 – Part names and functions
TASCAM GA-30CD
o
d f
g h
i
e
r t y
p
a
s
u
Top Panel
In.addition.to.standard.CD.player.functions,.the.CD.
Trainer.also.has.a.tuner,.a.metronome,.an.oscillator.and.
other.features..
e
.
CD player cover
.
Lightly.press.the.
ø
mark
at.the.front.of.the.cover.to.
open.the.player..
r
.
LOOP I/O
.
key
.
Use.for.loop.playback..
Press.this.key.to.set.the.loop.IN.point.(starting.
point).for.the.currently.playing.or.paused.CD..Press.
this.key.again.to.set.the.OUT.point.(ending.point).
and.start.loop.playback.automatically..
When.IN.and.OUT.points.are.set,.press.and.hold.
this.key.to.turn.loop.playback.between.the.IN.and.
OUT.points.ON.and.OFF..
When.IN.and.OUT.points.are.not.set,.press.and.hold.
this.key.to.turn.single.track.or.all.track.repeat.ON.
and.OFF..(See.“Repeat.playback.of.a.selected.loop”.
and.“All.track.or.single.track.repeat.playback”.on.
page.16.)
t
.
TUNER/SETUP key
.
Press.this.key.to.turn.the.tuner.ON.and.OFF..Make.
detailed.tuner.settings.using.the.Setup.menu..(See.
“Using.the.tuner”.on.page.18.).
Press.and.hold.this.key.to.open.the.Setup.menu.
to.adjust.the.time.display.mode.as.well.as.other.
functions,.including.tuner.settings..Once.in.the.
Setup.menu,.press.this.key.to.cycle.through.setting.
items..(See.the.“Changing.settings”.chapter.on..
page.19.).
y
.
Setting adjustment keys
.
Use.the.three.setting.change.keys.to.adjust.settings..
DOWN
:.Reduce.values,.flatten.the.pitch.or.shift.the.
stereo.position.to.the.left..
CENTER
:.Restore.the.default.value,.cancel.pitch.
changes.or.reset.the.stereo.position.to.the.center..
UP
:.Increase.values,.sharpen.the.pitch.or.shift.the.
stereo.position.to.the.right..
u
.
CD Trainer LCD
Shows.information.about.CD.playback,.etc..
i
.
GUITAR CANCEL key
.
Press.this.key.to.turn.Guitar.Cancel.ON.and.OFF..
The.indicator.lights.when.ON.and.blinks.when.in.
setup.mode..Press.and.hold.this.key.to.open.the.
Guitar.Cancel.setting.menu..In.this.menu,.press.this.
key.to.cycle.through.setting.items..(See.“Canceling.
guitar.sounds”.on.page.17.).
o
.
OSC key
.
Press.this.key.to.start.the.oscillator.and.output.an.
adjustable.pitch.signal.from.the.side.speakers..(See.
“Using.the.oscillator”.on.page.18.).
Press.and.hold.this.key.to.access.the.Calibration.
menu.and.set.the.standard.tuning.frequency..(See.
“Calibrating.the.tuning.frequency”.on.page.18.)
CD Trainer section