18
TASCAM DR-701D
Troubleshooting
If you are having trouble with the operation of this
unit, please try the following before seeking repair.
If these measures do not solve the problem, please
contact the store where you bought the unit or TEAC
customer support (see back page).
8
The unit will not turn on.
• Confirm that the batteries are not dead.
• Confirm that the batteries are installed with the
correct
¥
/
^
orientation.
• Confirm that the AC adapter (TASCAM PS-P515U,
sold separately) is securely connected to both
the outlet and the unit.
• When using USB bus power, confirm that the
USB cable is securely connected.
• When using USB bus power, confirm that it is
not connected via a USB hub.
8
The unit turns off automatically.
Is the automatic power saving function on? (See
“Setting the automatic power saving function” in
“Settings and Information” of the Reference Manual.)
i
Since this unit complies with the European
Standby Power Regulations (ErP), the automatic
power saving function operates regardless of
whether the unit is being powered by an AC
adapter or batteries. If you do not want to use the
automatic power saving function, set it to
OFF
.
(The factory default setting is
30min
.)
8
The unit does not function.
• Confirm that the HOLD/
switch is not set to
HOLD.
• Is the unit connected to a computer by a USB
cable?
8
The SD card is not recognized.
• Confirm that the SD card is inserted completely.
8
Playback is not possible.
• If you are trying to play a WAV file, confirm that
the sampling frequency is supported by this
unit.
8
No sound is output.
• Check the connections with the monitoring
system.
• Is the volume of the monitoring system
minimized?
• Is the output level setting of the unit minimized?
8
Recording is not possible.
• Check connections with other equipment again.
• Check the input settings again.
• Confirm that the input level is not too low.
• Confirm that the SD card is not full.
• Confirm that the number of files has not reached
the maximum that the unit can handle.
8
The input level is low.
• Confirm that the input level setting is not too
low.
• Confirm that the output level of any connected
device is not too low.
8
The sound I am trying to record sounds
distorted.
• Confirm that the input level setting is not too
high.
8
Adjust the input knobs so that the PEAK
indicators do not light.
• Lower the volumes of the sound sources being
input to this unit.
8
I cannot erase a file.
• Confirm that you are not trying to erase a
write-protected file that has been copied from
a computer.
8
This unit’s files do not appear on the
computer.
• Confirm that the unit is connected to the
computer using its USB port.
• Confirm that no USB hub is being used.
• Confirm that the unit is not recording.
• Is the unit connected to a computer by USB?
