DR-10C/DR-10X
Release Notes
2
TASCAM DR-10C/DR-10X
5. While pressing the
7
/
9
[ENTER] and PHONES [+]
buttons at the same time, turn the unit on.
If using USB bus power only (no batteries), while
pressing the
7
/
9
[ENTER] and PHONES [+]
buttons at the same time, connect a USB cable to the
computer and then the USB port on this unit.
The unit will start in update mode. After checking the
microSD card, the following screen will appear.
CAUTION
If this screen does not appear, turn the unit off once
and follow the procedures in step 5 again. Press and
hold the
7
/
9
[ENTER]
and
PHONES [+]
buttons
firmly until this screen appears.
6. The following screen will appear when you release the
buttons.
The current version is shown on the left and the
update version is shown on the right.
NOTE
•
If the microSD card does not contain an update file,
the screen above will not appear and the unit will
start in normal mode.
•
If the microSD card contains multiple update files, the
first file recognized will be shown.
•
The screen shown above is an example. The actual
appearance will differ.
7. Press the
7
/
9
[ENTER] button to show a reconfir-
mation screen as follows.
8. Press the
.
[
j
] button to start the update.
9. When updating completes,
Update OK
will appear
on the screen, and the unit will automatically restart in
normal mode.
10. Refer to “Checking the firmware version” and confirm
that the
VERSION INFO
menu item shows the
latest firmware version.
This completes updating the unit.
11. Connect the unit to a computer by USB, and delete the
firmware update file in the root directory of the unit.
