IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-GT2
Other functions
LEVEL
Adjust the output sound level between 0 and 100 with the
VALUE
(–, +) keys.
CALIB
Set the standard frequency of middle A between 435 Hz and
445 Hz. This setting affects all tuner modes.
Using a footswitch
You can use a footswitch to control certain operations. A
footswitch can be set to control FLASH BACK, fast reverse or
fast forward, as well as to change the effect bank or turn the
effects ON and OFF.
Connecting a footswitch
Connect a TASCAM RC–30P or other momentary footswitch
(non-latching) to the FOOT SW jack on the front of the unit.
After connection, press the
MISC.
key to open the
SETUP &
MISC.
screen and make settings as necessary.
Setting the function
Use the
CURSOR
(
§
,
¶
) keys to select
FOOT FUNC
, and the
VALUE
(+, –)
keys to choose one of the following functions.
FLASH
functions like the
FLASH BACK
key
REW
functions the same as the
µ
/
∆
key
FF
functions the same as the
≤
/
˚
key
BANK
changes the effect bank
EFFECT
turns the effects ON and OFF
Setting the polarity
When using a footswitch other than a TASCAM RC-30P, the
polarity might need to be changed. Use the
CURSOR
(
§
,
¶
)
keys to select the
FOOT TYPE
item and the
VALUE (+, –)
keys to select
NORMAL
or
INVERT
according to the type of
footswitch used.
Summary of Contents for CD-GT2
Page 2: ......
Page 39: ...IMPORTANT SAFETY INSTRUCTIONS 39 TASCAM CD GT2 Notes...
