background image

TASCAM CD-DJ1

This unit can play back MP3 file discs that meet the 
following requirements.

Disc: CD-ROM MODE 1 (Multi-session discs are 
unsupported, but playback of the files in the first 
recorded session is possible.)
File format: MPEG 1 Audio Layer 3

Bit rate: 32 to 192 kbps (VBR is not supported)
Sampling frequency: 44.1k Hz, mono or stereo
File extensions: mp3, Mp3, mP3, MP3
ID3 tags are supported.




Playback range selection 

MP3 file playback can be set to either play all tracks 
in the currently selected folder or all tracks on the 
disc (in all folders). Use the Setup menu FOLDER 
item to choose this option.

Set the FOLDER menu item to 

OFF

 (default setting) 

to select complete disc playback. Set it to 

ON

 to play 

only the tracks in the selected folder.

Folder selection

Press a 

SKIP

 key while holding down the 

SHIFT 

key 

to select folders.

ª

Display indication

MP3

 appears on the display during MP3 playback.

The time display mode is always 

ELAPSED

 (track 

time elapsed). 

REMAIN

 and 

TOTAL REMAIN

 are not 

used with MP3 files.
Press the 

TIME/ENTER/TITLE

 key while holding 

the 

SHIFT

 key to change the MP3 information 

display.

  Track titles (

TITLE

)

  File names (

FILE

)

The total track number displayed depends on the 
Setup menu FOLDER setting. The number shown 
is either the total number of MP3 files in the cur-
rent folder or the total number on the disc.

Functions disabled during MP3 playback

The following functions cannot be used during MP3 
playback.

Track search
JOG dial operation (scrub playback)
Cue
Hot Cue
Loop playback





6- MP3 playback

Summary of Contents for CD-DJ1





























Reviews: