8
— TASCAM CD-BT1
TASCAM CD-BT1 —
9
Making connections
Inputs
Connecting a bass
o connect a bass to the unit simply
connect one end of the bass cord to
the bass and connect the other to the
BASS IN
jack of the
f you use effects pedals or stomp
boxes you can connect the output of
these to the remember that
the has its own effects
f you are using an active bass set
the
BASS IN
slide switch on the side
to
ACTIVE
else set this switch to
PASSIVE
ake sure the
BASS
power button is
pushed to activate the effects etc
WARNING
NEVER connect a bass or guitar amplifier to
the CD-BT1’s
BASS IN
input, as you will
damage your equipment if you do this.
Connecting a stereo line source
ou can also connect a stereo line
source such as the outputs from a syn
thesizer a guitar preamplifier or rack
mount effects unit or a cassette deck
etc to the se the
LINE IN
minijack beside the
BASS IN
jack
is unit will not be able to use the
effects and of the
WARNING
You should NEVER connect the speaker out-
puts of a bass or guitar amplifier to anything
except speakers. If you are in any doubt at all
about what you can connect to your CD-BT1,
ask someone who knows.
Connecting a footswitch
ou can connect a footswitch to the
to step through the effect
slot settings or to cue the player
handsoff see later in this manual
for details
o avoid problems with your
use only a
footswitch or similar nonlatching
pushtomake footswitch connected
to the
FOOT
jack
Outputs
onnect the unit to a stereo systems
input or mixer input etc using
a suitable stereo cable not supplied
connected to the s
LINE OUT
stereo minijack
onnect a pair of headphones not
supplied to the
PHONES
stereo mini
jack for private listening
