10
TASCAM CD-450
Programed Play
A maximum of 30 tracks can be programed.
1
Press the
PGM
key on the optional remote to let
"
PROGRAM
" show in the display.
2
Enter the desired tracks on the numeric keypad.
* To enter track 5 for example, press 0 then 5.
To delete tracks from the program memory
Use the
CHECK
key to let the track number you
want to delete blink, then press the
CLEAR
key.
To add tracks
To add track 3 for example after track 9 already
programed, let "
9
" blink with the
CHECK
key, then
press 0, 3 on the numeric keypad.
To check the content of the program
memory
While in STOP each time you press the
CHECK
key track numbers programed will show in the dis-
play in order of play.
Displayed to the right of the track numbers is total
play time.
When the total play time exceeds 999 minutes 59
seconds, the display will read "ExxMxxS."
Repeat Play
All tracks
Press
REPEAT
, then press
PLAY
.
A single track
Press the
SINGLE
key, then enter the desired track
on the numeric keypad.
Two-point repeat
During play, press the A-B REPEAT key at the
desired start point of play loop, and again press the
key at the desired end point of your loop.
Changing the Pitch
By operating the "
+
" and "
–
" keys of
PITCH
CONT
you can change the pitch within the limits of
±12% in 1% steps. The pitch percent value is
shown in the INDEX display window.
Press the
PITCH CONT
switch to let its LED light
up, then press
PLAY
to start play at the entered
pitch.
Alternatively, you can press the
PITCH CONT
switch before changing the pitch with the "
+
" and
"
–
" keys. But you cannot switch pitch changes on
and off during play.
If you have set a fixed pitch on the preference set-
ting screen, the PITCH CONT LED will blink
when you switch on power to the deck, showing
that the deck plays at a fixed pitch. If you then press
the
PITCH CONT
switch, its LED will turn on
solid, and you can further change the pitch. When
you press the
PITCH CONT
switch again, the deck
will switch back to your fixed pitch.
Incremental Play
During incremental play, each time you press the
PLAY
key, play starts from the beginning of the
next track.
If you press
STOP
instead of
PLAY
during play,
the deck will go into Ready at the beginning of the
next rack. In this case, the AUTO CUE feature
comes on if previously enabled.
If you are using a fader switch, the deck goes into
Ready at the beginning of the next track each time
you switch the deck from Play to Ready.
Operations
