1 – Introduction
TASCAM CC-222
MK
IV
13
2 – Features of the CC-222
@%^
Display
This display shows various types of operation information,
including CD disc information, deck operation modes, and
menu status.
1
˙/¥
(Tape-running indicator) Shows the direction of a
tape during playback or recording.
2
Tape PAUSE (
π
)
Lights when the unit is in standby
mode for tape playback or recording.
3
Tape
PLAY
Lights when a tape is being played back or
recording.
4
Tape REC
Lights during tape recording or recording
standby mode.
5
Tape Counter display
The tape counter value is incre-
mented when the tape is moving from left to right, and
decremented when it moves from right to left (See “Tape
counter” on page 33 for more details).
6
Character display
Disc or track information, menu,
message, time, and operation status are displayed.
7
Tape Level meter
Displays the playback level and the
input level of the source device for recording operation.
8
TAPE, CD
In the CD-TAPE CONT PLAY mode (con-
tinuous CD/tape playback), on of these will flash during
playback.
9
Counter display
Either
TOTAL
or
REMAIN
is lit. When
both indictors are off, the time mode is set to show the
elapsed time of the current track.
0
Disc information display
NO TOC
Lights when a disc
does not contain TOC (Table of Contents) data.
CD
,
CD-R
or
CD-RW
lights up when a disc with TOC data
is loaded.
q
CD PLAY
(
¥
) Lights during disc playback.
w
CD REC
Lights during disc recording or recording
standby mode.
e
SYNC
Lights when the SYNC recording mode is on.
r
REPEAT, A-B
display
When the Repeat function is
on, “
REPEAT
” is lit. When the A-B Repeat function is
on, “
REPEAT
” and “
A-B
” are lit. “
A-B
” also blinks until a
“B-point” is entered.
t
INPUT 2
This is always displayed except when record-
ing with the
PHONO
key.
y
LINE 2, DISC display
Shows the different sources
available for
INPUT 2
(Tape deck).
LINE 2
:
a signal source is connected to
LINE INPUT 2
.
DISC
:
a signal source is connected to internal CD drive.
u
DUB 1, 2
When dubbing a tape to a CD-RW, the indica-
tor “
DUB 1
” lights up. When dubbing a CD-RW to a tape,
indicator “
DUB 2
” lights up.
i
INPUT 1
This is always displayed except when record-
ing with the
PHONO
key.
o
OPTICAL, COAXIAL, LINE 1, PHONO, TAPE display
Shows the different sources available for
INPUT 1
(CD
drive).
OPTICAL
:
Input source is connected to
OPTICAL
.
COAXIAL
:
Input source is connected to
COAXIAL
.
LINE 1
:
Input source is connected to
LINE 1
.
PHONO
:
Input source is connected to
PHONO
.
TAPE
:
Input source is connected to internal tape deck.
p
A·TRACK
Lights when the Auto Track function is on.
The indicator blinks when Time mode is selected.
a
A·SPACE
Lights when the Auto Space function is on.
s
CD PAUSE
(
π
) Lights during playback or recording
standby mode.
d
SINGLE, RANDOM, PROGRAM display
Depending
on the playback mode selected. When all the indicators
are off, Continuous playback mode is on.
f
CD Level meter
Displays the playback or input source
level when recording.
g
MUSIC CALENDER
Available tracks for playback light
up; played back tracks disappear from the screen. When
there are more than 20 tracks available for playback, the
“
OVER
” indicator lights up.
