Tascam BB-1000CD, Owner'S Manual

Page: 24 / 56

24
TASCAM BB-1000CD
3–Part Names and Functions
y
OVERDUB
key
Press this key when recording a mixed sound of CD/SD
playback and other input signals (overdubbing).
The unit becomes on standby for overdubbing by
pressing the key and the key lights during on standby.
u
REC/READY [
º
]
key
Press this key to make the unit on standby for
recording. The key is flashing while on standby. The
key lights during recording.
During recording, press this key to make the unit on
standby for recording.
i
F1
key
This key works variously depending on the status
of the unit; confirming of the selection, returning to
the previous step. etc. The function of the
F1
key is
indicated on left bottom of the display.
o
HOME
key
Press this key to return to the Home screen while
displaying another screen.
p
MENU
key
When the Home screen is displayed, press this key to
open the menu list (
MENU
screen).
When a setting screen is displayed, press this key to
return to the
MENU
screen.
a
F2
Key
This key works variously depending on the status
of the unit; confirming of the selection, returning to
the previous step. etc. The function of the
F2
key is
indicated on right bottom of the display.
s
CURSOR
[
§ / ¶ / ˙ / ¥
] key
Press this key to move the cursor (highlighted area) on
a setting screen.
d
STOP
key
Press this key to stop playback. The track returns to its
beginning.
f
 / Ô
key
Press this key within 1 seconds from the beginning of
a track to skip to the beginning of the previous track.
Pressing it at more than 1 seconds after the beginning
of a track skips to the beginning of the current track.
Press and hold this key to fast-reverse the tracks.
Pressing this key during loop playback slides the end
point of the loop back to its start point, keeping the
time length of the loop.
g
¯ / 
key
Press this key to skip to the next track.
Press and hold this key to fast-forward the tracks.
Pressing this key during loop playback slides the start
point of the loop forward to its end point, keeping the
time length of the loop.
h
PLAY/READY
[
Á / π
] key
When the Home screen is displayed and playback is
stopped, press this key to start playback.
During playback, press this key to pause it.
j
FLASH BACK
key
Press this key to skip a few seconds back the track
during playback (or pause). You can adjust the skip
back time at the
SET UP
screen (
∑
page 36 “Skipping a
track a little backward (
FLASH BACK
)”).
k
TUNER
key
Press this key to open the
TUNER
screen. You can use
the unit as a chromatic tuner for instrument (
∑
page 41
“Chromatic tuner mode”).
When the
TUNER
screen is displayed, press this key to
return to the Home screen.
l
LOOP
key
Use this key to activate/deactivate the loop playback
when the start point and end point of playback has been
set (
∑
page 37 "Loop playback (I–O LOOP)”).
Use this key to activate/deactivate repeat playback
when the points are not set (
∑
page 37 “Repeat
playback” ).
Press
IN
/
OUT
/
MARK
key while pressing and
holding this key to clear the start/end/marker point,
respectively.
;
IN
key
Use this key to set the start point of the loop playback.
Press this key while pressing and holding the
LOOP
key
to clear the start point (
∑
page 37 "Loop playback (I–O
LOOP)”).
z
OUT
key
Use this key to set the end point of the loop playback.
Press this key while pressing and holding the
LOOP
key
to clear the end point (
∑
page 37 "Loop playback (I–O
LOOP)”).
x
MARK
key
Use this key to set the marker point where playback
starts. Press this key while pressing and holding the
LOOP
key to clear the marker point on the Home
screen. (
∑
page 36 “Playback from marked point”).
BB-1000CD̲En.indd 24 BB-1000CD̲En.indd 24 09.2.3 2:19:32 PM 09.2.3 2:19:32 PM