IMPORTANT SAFETY PRECAUTIONS
14
TASCAM 202
MK
V
3 − Playback
3
3
Continuous playback can be performed between
TAPE 1 and TAPE 2. When one tape is played back to
the end, the other tape automatically starts playback,
in a relay fashion.
1. Load pre-recorded tapes into the TAPE 1 and
TAPE 2 compartments.
2. Set the
DOLBY NR
switch.
Always set the
DOLBY NR
switch to the same
position that was used for recording.
3. Set the
REV MODE
switch to the
ä
(
CONT
PLAY
) position.
4. Press the
PLAY
(
˙
or
¥
) key of the deck you
want to start first.
You can start continuous playback from either
TAPE 1 or TAPE 2.
Playback cycles through four tape sides as fol-
lows, and will continue as many as 5 times when
you start the playback from Side “A” on TAPE 1,
or until you stop the operation.
TAPE 1
Side“A”
∑
Side “B”
™
≈
TAPE 2
Side “B”
ß
Side “A”
Continuous playback
RTZ (1) (TAPE 1 only)
Press the
RTZ (1)
key to locate to the “
0000
” posi-
tion.
NOTE
RTZ (Return-to-zero) only works on TAPE1.
•
If the counter position is too close to the 0000
•
mark (greater than 9994 or less than 0005), the
RTZ function cannot be used.
