TASCAM SERIES 102i / SERIES 208i
15
Line inputs (balanced)
SERIES 102i: 1-2
SERIES 208i: 1-2, 3-4
(when the input switch set to MIC/LINE)
Connectors: 6.3 mm (1/4 “) standard TRS jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kΩ
Rated input level:
-54 dBu (0.0015 Vrms,
GAIN
knob at maximum)
+4 dBu (1.228 Vrms,
GAIN
knob at minimum)
Maximum input level: +24 dBu (12.282 Vrms)
Gain range : 58 dB
Analog outputs
Monitor outputs (balanced, LINE OUT 1-2)
Connectors: 6.3mm (1/4”) standard TRS jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Output impedance: 230 Ω
Nominal output level: +4 dBu (1.228 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
Line outputs (balanced, LINE OUT 3-8, on
SERIES 208i only)
Connectors: 6.3mm (1/4”) standard TRS jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Output impedance: 230 Ω
Nominal output level: +4 dBu (1.228 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
Headphone outputs (PHONES / )
Connectors: 6.3mm (1/4”) standard stereo jacks
Maximum output:
SERIES 102i: 18mW + 18mW
SERIES 208i: 45mW + 45mW
(THD+N 0.1% or less, into 32 Ω load)
Digital audio input ratings
OPTICAL (S/MUX) IN (SERIES 208i includes A
and B)
Connectors: OPTICAL (JEITA RC-5720C)
Signal format: Multi-channel optical format
(Supports S/MUX when 88.2 k, 96 k, 176.4 k or 192 kHz.)
Control input/output
USB
Connector: 4-pin USB B-type
Transfer rate: USB 2.0 High Speed (480 Mbps)
MIDI IN connector
Connector: 5-pin DIN
Format: standard MIDI
MIDI OUT connector
Connector: 5-pin DIN
Format: standard MIDI
WORD IN connector (SERIES 208i only)
Connector: BNC
Input voltage: 2.0 Vpp - 5.0 Vpp
Input impedance: 75 Ω ±10%
Permitted frequency deviation during external synchronization:
±100 ppm
Terminal on/off switch
WORD OUT connector (SERIES 208i only)
Connector: BNC
Input voltage: 2.0 Vp-p (into 75 Ω)
Output impedance: 75 Ω ±10%
Sampling frequencies: 44.1, 48, 88.2, 96, 176.4 and 192 kHz
Audio performance
Mic amp EIN (equivalent input noise)
-129 dBu or lower
Frequency response
MIC/LINE IN
At 44.1/48 kHz, 20 Hz - 20 kHz: +0 dB/-0.4 dB (JEITA)
At 88.2/96 kHz, 20 Hz - 40 kHz: +0 dB/-0.8 dB (JEITA)
S/N ratio
109 dB
(
MIC/LINE IN
,
GAIN
knob at minimum, 20 kHz SPCL LPF+A-Weight)
110 dB
(
LINE OUT
,
MONITOR
knob at maximum, 20 kHz SPCL LPF+A-Weight)
THD + N
SERIES 102i
0.0016%
(
MIC IN
, 1 kHz sine wave,
GAIN
knob at minimum, 20 kHz
SPCL LPF)
0.0023%
(
LINE IN
, 1 kHz sine wave,
GAIN
knob at minimum, 20 kHz
SPCL LPF)
0.0014%
(
LINE OUT
, 1 kHz sine wave,
MONITOR
knob at maximum, 20
kHz SPCL LPF)
SERIES 208i
0.0013%
(
MIC IN
, 1 kHz sine wave,
GAIN
knob at minimum, 20 kHz
SPCL LPF)
0.0019%
(
LINE IN
, 1 kHz sine wave,
GAIN
knob at minimum, 20 kHz
SPCL LPF)
0.0014%
(
LINE OUT
, 1 kHz sine wave,
MONITOR
knob at maximum, 20
kHz SPCL LPF)
Crosstalk
100 dB or more
(
MIC/LINE
w
LINE OUT
, 1kHz sine wave,
GAIN
knob at mini-
mum)
