Tarox WingPad 2010, User Manual

Page: 114 / 188

Modules
7 - 6 Bluetooth/WLAN Combo Module
7
Bluetooth/WLAN Combo Module
Before installing the Bluetooth/WLAN driver, make sure that the optional
Bluetooth module/WLAN is on. Use the Bluetooth module key combina-
tion Fn + F12 to toggle power to the Bluetooth module . Use the WLAN
module key combination Fn + F11 to toggle power to the WLAN module
(the LED will be orange for Bluetooth and green for WLAN). Make
sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 7 .
Combo Module Bluetooth Driver Installation (Win2000)
1. Insert the Bluetooth/WLAN Combo CD-ROM into the CD/DVD drive.
2. The program will run automatically.
3. Click Install Bluetooth Driver and click Next .
4. Click the button to accept the license agreement, then click Next .
5. Click Next > Install (click OK if asked if you want to continue).
6. Click Finish > Yes to restart the computer.
7. You can configure the settings in the Bluetooth Configuration control
panel ( Start menu and point to Settings and click Control Panel then
double-click the Bluetooth Configuration icon).
The User Guide ( UsrGuide.pdf ) is on the Bluetooth/WLAN Combo CD-
ROM in the D:\Software\Bluetooth Software folder . Install adobe Acrobat
in order to read the file (it is on the Device Drivers & Uti User’s Man-
ual CD-ROM ).
Wireless Device
Operation Aboard
Aircraft
The use of any porta-
ble electronic trans-
mission devices
aboard aircraft is usu-
ally prohibited. Make
sure the module(s) are
OFF if you are using
the computer aboard
aircraft.