7
Rotate uncontrollable.
•
Check the mounting direction of gyro.
•
Check the Gyro Compensation Direction.
•
Move all the sticks to check the servo direction.
Rotate on a direction slowly and continually, drift.
keep the sticks centered, keep the gyro steady, restart the gyro.
Helicopter is not stable enough
Increase the total gain of main rotor.
The main rotor is oscillate quickly
Decrease the total gain of main rotor.
Red LED is flashing fast Intermittently
ZYX-S2 detects the minimum supply voltage is lower than 3.8V, replace the gyro power supply
module or check whether there is servo stuck phenomenon.
Yellow LED is flashing slowly
Error occur during RC signal Initialization, please check the receiver option and wires, keep the
sticks centered, restart the gyro.
Blue LED is flashing slowly
Error occur during sensor Initialization, keep the gyro steady and restart the gyro.
