Tarot VR Bot-1 User Manual Download Page 9

13

14

Battery Safety Guidelines

Battery Maintenance

Never use the battery when the temperature is too high or too low.
Do not store the battery in any environment with a temperature of over 140°F.

1.
2.

Transportation Notice

Discharge the battery power to 5% or lower before carrying the battery on an airline flight. Only discharge 
the battery in a fireproof location, ideally in a dry and open area.
Do not store or transport batteries together with metal objects such as eyeglasses, watch, and jewelries, etc. 
Do not transport damaged batteries. When transporting, be sure to discharge the battery to less than 50%.

1.

2.
3.

Battery Disposal

Dispose of the battery in specific recycling boxes only after a complete discharge. Do not put away the bat-
tery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of 
batteries.

Battery Safety Guidelines

Battery Charging

Do not use the battery if it has been involved in a crash or heavy impact.
Do not heat the battery and never put the battery in a microwave oven or in a pressurized container.
Do not place the battery cell on a conductive surface (such as a metal desk surface).
Prevent use of wires or other metal objects that could cause positive and negative short-circuit to the battery.
If the battery terminal is dirty, wipe it with a clean, dry cloth. Otherwise it will cause a bad battery connec-
tion, which may result in energy loss or charging failure.

10.
11.
12.
13.
14.

Do not put the battery and charger near flammable materials or on flammable surfaces (such as carpet or 
wood). Never leave the battery unattended during charging to prevent any accident. 
Do not charge the battery immediately after use, because the battery temperature may be too high. Do not 
charge the battery until it cools down to normal room temperature. Charging the battery with its tempera-
ture over 104°F or lower than 59°F may lead to leakage, overheating, or damage. 
Examine the charger before use, make sure there is no damage to the enclosure, cord, plug, or other parts. 
Never use a damaged charger. Do not clean the charger with any liquid containing alcohol or other flamma-
ble solvents. Disconnect the charger when not in use.

1.

2.

3.

Battery Storage

Keep batteries out of the reach of children and pets.
Do not leave the battery near heat sources such as a furnace or heater, or inside of a vehicle on hot days. 
Never expose the battery in any environment with temperature of over 140°F. The ideal storage temperature 
is 71.6°F to 82.4°F.
Store batteries in a dry environment.
Do not leave the battery unused for too long after it has been completely discharged to prevent over-dis-
charge of battery which may result in battery damage and permanent failure.

1.
2.

3.
4.

Summary of Contents for VR Bot-1













Reviews: