3
TM
Sample USB device
PAUH216U/410-0041-001B
Features and specifications subject to change without notice. Microsoft
®
, Windows
®
, and Windows Vista
TM
are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the properties
of their respective owners. All rights reserved. © 2006, Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA.
Technical Support
For technical questions, please visit:
US
Internet:
www.targus.com/support.asp
Australia
Internet:
www.targus.com/au
Email:
Telephone:
1800-641-645
New Zealand
Telephone:
0800-633-222
Warranty
Targus warrants this product to be free from defects in materials
and workmanship for one year. If your Targus accessory is found
to be defective within that time, we will promptly repair or replace
it. This warranty does not cover accidental damage, wear and
tear, or consequential or incidental loss. Under no conditions is
Targus liable for loss of, or damage to a computer; nor loss of, or
damage to, programs, records, or data; nor any consequential or
incidental damages, even if Targus has been informed of their
possibility. This warranty does not affect your statutory rights.
Product Registration
Targus recommends that you register your Targus accessory
shortly after purchasing it.
Go to: http://www.targus.com/registration.asp
You will need to provide your full name, email address, phone
number, and company information (if applicable).
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
• Consult the dealer or experienced radio/TV technician for help.
Changes or modifications not authorized by the party
responsible for compliance could void the user’s authority to
operate this product
