6
Targus Mobile Port Station
2 Connect the USB cable’s type A end into an available
USB port on your computer.
3 Connect the supplied AC power adapter to the AC
power jack on the Mobile Port Station.
Installing the Default Device Drivers
Once you connect the Mobile Port Station to your
computer, the following default drivers begin installing for
each of the ports:
• Ethernet 10/100
• Serial Interface Controller
• USB Device (Hub)
• Parallel Interface Controller
• Audio (out)
This installation process takes a few minutes. The operating
system doesn’t prompt when installation is complete. If you
attempt to open another application during installation, it
will not respond until installation is complete.
Windows
®
2000/XP Operating System
If you are running the Windows
®
2000/XP operating
system, some hardware devices may prompt you to install
the drivers.
To install the drivers:
1 Select
Install the software automatically
(Recommended)
and click
Next
.
The Found New Hardware Wizard program begins
installing the hardware drivers.
The Completing the Found New Hardware Wizard
screen appears.
Summary of Contents for PAEPR090U
Page 1: ...Mobile Port Station ...
