11
However, the mouse will continue to work as a standard,
two-button mouse and the keyboard as a standard
keyboard.
Troubleshooting
Device Not Working
• Make sure that the device is fully inserted into the correct
port on the port replicator.
• Plug the device into a different port on the port replicator.
If it still doesn’t work, test the device by connecting it
directly to your computer.
• Verify that you ran the Setup or Install program for the
device.
• Make sure that the device appears in Device Manager.
For more information refer to “Verifying Devices are
Installed” on page 11.
• Disconnect all devices from the port replicator and
reconnect them, one at a time. Check that each device
works before plugging in the next one.
Printer Not Found
If your parallel printer is not working, refer to “Checking and
Redirecting the Printer Port Settings” on page 8 for
instructions on how to verify and change the port settings.
Verifying Devices are Installed
You can view the devices installed on the port replicator
from the Device Manager window in System Properties.
Right-click
My Computer
,
Properties
, then click the
Hardware
tab, and then the
Device Manager
button.
