Configuration
Use the Options menu on the Port Keypad Manager to configure the
keypad.
Configure Hardware
You must specify the COM port to which the Port Keypad is
connected. The keypad does not automatically detect this. Determine
the COM port number of your computer external serial port. Then
select Options, Configure Hardware from the Port Keypad Manager
menu. You will see a dialog box similar to the following:
Select the appropriate COM port number and click on OK. There is no
need to restart Windows. Your keypad should be operational if you
have selected the correct COM port.
Test Mode
You may test your keypad to make sure it is operating properly by
selecting Test Mode from the Options menu. A check mark will appear
next to the Test Mode menu item when this option is selected. When
you are finished testing the keypad, click on the Test Mode menu item
again or press ESC to return the keypad to normal operating mode.
The check mark will disappear when you exit Test Mode.
Save Current Settings
Click on this menu item to save all option settings. Whatever
configuration you have established will become the default
configuration the next time you launch the keypad manager.