Targus Noteworthy Instructions Manual Download

Page: 25 / 28

HAPTER

Reference Section

General problems

If you have problems getting your TARGUS Noteworthy DVD-
ROM drive to function properly please check the following:

• Does your system meet the hardware requirements.
• Check to see if the PC Card Cable is attached to the drive

correctly and inserted all the way in the PC Card slot

• Is the drive getting power? Check to see if media tray can

be opened by pressing the eject button after the notebook
is powered on.

If there is no sound, check if

• The headphones/speakers are correctly connected
• The cable is damaged
• The volume is up
• The audio software is installed

Playing a DVD-ROM Movie title

To play a DVD-ROM movie you need a DVD-ROM decoder
either installed in the notebook or a player application setup
under Windows 95/98/ME/2000. Windows NT 4.0 does not
support DVD-ROM Movie playback.

Reference Section

Summary of Contents for Noteworthy





























Search results

Summary of Contents for Noteworthy

Reviews:

Related manuals for Noteworthy

Brands by name

Popular brands

Targus Noteworthy, Instructions Manual

Search results

Summary of Contents for Noteworthy

Reviews:

Related manuals for Noteworthy

Brands by name

Popular brands