7
USB 2.0 Rewriteable DVD+/-RW Slim External Drive
Hot Swapping
You can connect and disconnect the Targus drive while the computer is running. When
connecting the Targus drive, first connect the Type A connectors of the Y-cable and then
connect the Type B connector. When disconnecting the drive, disconnect the Type B
connector first, followed by both Type A connectors.
Writing and Rewriting CDs/DVDs
To write and rewrite CDs/DVDs, you must install writing software. For your convenience, a
CD/DVD writing application is supplied. To install the CD/DVD writing software:
1 Insert the supplied CD-ROM into the Targus drive (or your computer’s internal
CD-ROM drive if it has one).
2 If setup does not begin automatically, click Start, then Run, and enter
D:\setup.exe
(where
D:
is the path of the CD-ROM drive) and click OK.
3 Follow the on-screen instructions to complete installation.
For more information on how to use the CD/DVD writing application, refer to the
documentation on the CD-ROM.
Things to Remember
Operating Hints
• Never press the eject button while the Targus drive is accessing a disc.
• The Targus drive operates in either an upright or horizontal position. To prevent possible
damage, avoid changing the drive’s position while it is in use.
• Avoid using or storing the Targus drive in extreme temperatures. The environmental
specifications while operating are 41-113 degrees F (5-45 degrees C).
• After transporting the Targus drive, allow it to reach room temperature before using it.
CAUTION: Changes in temperature during transport, particularly from a cool to a
warmer temperature, can cause condensation to form in the drive and may result in
operating problems. Allowing the drive to reach room temperature helps to prevent
this.
