• Insert the 2 AAA batteries beneath the battery cover of the
Bluetooth Thumbpad.
• Please follow the installation instructions carefully corresponding
to the correct mobile device platform you are using.
Bluetooth® Thumbpad for Smartphones, PDAs and Pocket PCs
On / Off switch
Status Indicator Light
<LINK> button
Front
battery slots
battery cover
Back
Installing the Batteries
•
Remove the battery cover from the back of the thumbpad by
pressing down on the “arrow” and sliding off the back cover.
•
Insert the supplied batteries, making sure that the positive (+) and
negative (-) ends of each battery match the polarity indicators inside
the battery housing.
•
Snap the battery cover back into position.
•
Turn on the thumbpad by sliding on/off switch on the top of the
thumbpad to the “On” position.
WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE OR
OTHER HEAVY DUTY NiMH BATTERIES. NEVER USE AN ALKALINE WITH A NiMH
BATTERY IN A DEVICE. AVOID MIXING NEW AND USED BATTERIES IN A DEVICE
4