Targus Wireless Stow-N-Go
TM
Laptop Mouse
4
Targus Wireless Stow-N-Go
TM
Laptop Mouse
5
1. Remove the battery cover from the back of the mouse by sliding off the cover
of the mouse. Hold the mouse in your hands and with the back of the mouse
away from you. Press down on the corners of the battery cover and slide
towards the back of the mouse. Lift the cover off from the back of the mouse.
2. Insert two AA-size batteries, making sure that the positive (+) and negative
(-) ends of each battery match the polarity indicators inside the battery
compartment. To replace the battery cover, place the cover on top of the
mouse and slide forward until it clicks into place.
(B) Plug the USB receiver into an available USB port on your computer.
(C) Press and release the setup key on the receiver.
Establishing the Connection
(A) Remove the USB receiver from the bottom of the mouse.
