Targus ACW20US User Manual Download Page 8 | Manualshive

Page: 8 / 8

Targus ACW20US User Manual Download Page 8

8

FCC Statement

Tested to Comply

This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;

• Increase the separation between the equipment and receiver;

• Move the computer away from the receiver;

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

All trademarks and registered trademarks are the property of their

respective owners. Features and specifications subject to change without

notice. © 2005, Targus Group International, Inc. and Targus, Inc., Anaheim, CA

92806 USA.

«
...
6
7
8

Summary of Contents for ACW20US









Reviews:

No comments