Targus USB 3.0 PCIe Card - ATX Powered
2
Targus USB 3.0 PCIe Card - ATX Powered
3
Introduction
Congratulations on your purchase of the Targus USB 3.0 PCle Card - ATX
Powered. The Card is compliant to USB 3.0 Standards and backward
compatible with USB 2.0 devices. It also allows you to connect multiple
peripherals to your PC at the same time. The Card enhances the performance
of transmission that excessively faster than existing USB 2.0 device. It is the
ideal interface for transferring extremely large amounts of data from USB
2.0/3.0 compliant products such as real-time video cameras, portable devices
and others.
Contents
• TargusUSB 3.0 PCIe Card
• Low Profile Bracket
• CD( Driver)
• User Guide
System Requirements
• Microsoft Windows
®
2000
• Microsoft Windows XP
®
• Microsoft Windows Vista
®
• Microsoft Windows
®
7
Hardware Installation
1. Turn your computer off and any peripherals connected to the computer.
Unplug the power cable before installing the host card.
2. Remove the cover from the computer case.
3. Locate an available PCI Express slot and remove the bracket cover.
4. Insert the card into the open PCI Express slot and fasten the bracket to the
rear of the case.
5. Connect 4P power cable from the computer’s power supply to the card.
6. Place the cover back onto the computer.
7. Insert the power cable into the socket on the power supply.
USB 3.0 Ports
4-pin Power
Connector
