B
racket Assembly
Mounting
Ins
tallation
Both mounting brackets have the same
assembly instructions for both the
Bulletto and the Bul
l
etto Mini. Installer
will first remove the
lock nut that is
attached to the fixture. Once removed,
insert the fixture's cable and bottom end
through mounting bracket hole until the
fixture bottom is flat with the mounting
bracket. Then attach the lock ring back
on the fixture's bottom threading to
secure the fixture with the mounting
bracket. Be sure to properly tighten the
lock nut to secure the fixture on the
mounting bracket.
Once the mounting bracket is assembled,
using the measurements provided, mark
the distance on the designated mounting
surface and drill holes to prepare the
proper mounting fasteners. Installer is
responsible for providing the correct
mounting fasteners based on the surface
type. Installer will use the designated
mounting screws and secure the mounting
bracket to the surface. Installer must
comply with local building code when
installing.
Targetti USA - A Targetti Group Company - 750-A W 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991
-
Email:[email protected] - www.targetti.us -
04.10.20 - Page 3 of 9
Lock
1
2
3
24
mm
3.54"
( X )
0.33"
0.73"
X
4.25"
1.18"
Non incluso
Not included
1
Not included
Rotation
al
Bracket Mounting
2
