step 4: attach top panel
(H1)
x 8
wooden dowel
(H2)
x 4
cam bolt
(H3)
x 4
cam
(H8)
x 4
allen head bolt
(H9)
x 4
lock washer
(H10)
x 4
washer
(H11)
x 1
allen wrench
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-in cam bolts must be screwed down flush with panel.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Make sure bolts go through the pre-drilled holes properly.
4.5. Do not over tighten bolts.
10
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
