background image

WARNING 

For use with flat panel televisions 

weighing 35 pounds (15.9 kg) or less. 

Use with heavier televisions may 

result in instability causing tip over 

resulting in death or serious injury. 

Use of anti-tip restraints may only 

reduce, but not eliminate, the risk 

of tip-over. 

Manufactured by: BDDMI 

Factory #: 16840041 

1. WARNING - Death or serious injury may occur when children climb on 

audio and/or video equipment furniture. A remote control or toys placed 

on the furnishing may encourage a child to climb on the furnishing and as a 

result the furnishing may tip over on to the child. 

2. WARNING - Relocating audio and/or video equipment to furniture not 

specifically designed to support audio and/or video equipment may result 

in death or serious injury due to the furnishing collapsing or over turning 

onto a child. 

3. This unit has been designed for the weight shown. Exceeding this recom-

mended weight could result in excessive “sagging” of the top. Extreme 

overloading can cause failure of the top and possible injury. 

4. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray 

furniture polish as needed.

16

holds 

flat 

panel 

TVs

up to 29” or 35 lbs

25 lbs. per shelf

QUESTIONS? 

Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.  

Summary of Contents for Warwick FKWWCB3DWH




















Reviews: