SALICE
600 Series Adjustment Instructions
Height Adjustment
is achieved by loosening the two screws
indicated by the arrows. Once all plates are
loosened, the door can be repositioned vertically. The screws
are then tightened when the door is in the desired position.
Depth Adjustment
is achieved by loosening the center screw
indicated by the arrow. Once loosened, the door
can then be positioned away from the cabinet up to 2.8mm.
The screw is then tightened when the door is in the desired
position.
Lateral Adjustment
is achieved by rotating the screw
indicated by the arrow. By rotating the screw
clockwise, the overlay will be reduced and if rotated
counterclockwise, the overlay will be increased.
14
Series 600 Mini Hinge
-1.5+5
+2.8
L=0.7
+2
-2
SALICE
600 Series Adjustment Instructions
