background image

Quality That Lasts A Lifetime 

The maker of this product has extended his craftsmanship to 

include Salice hinges and/or other Salice products. 

Having undergone severe usage tests and met industry standards 

worldwide, our products confirm our commitment to pleasing the 

most discriminating customer - you. 

THE 

LIFETIME  GUARANTEE AND  LIMITED  WARRANTY* 

Salice America, Inc., warrants that all hinges and/or Salice products contained in 

this product, (but not the product itself) against defects in material and workman-

ship for as long as the original consumer purchaser owns the products. Salice 

will send the original consumer purchaser a new Salice hinge to replace any 

defective Salice hinge subject to this warranty without charge. The warranty is a 

warranty of replacement only. Salice specifically does not warrant removal of the 

defective hinge nor installation of a new hinge. This warranty does not cover 

hinges which have been incorrectly installed, exposed to excessive loads or 

abused. 

To obtain a replacement, you should, within 30 days of discovery of the defect, 

remove the defective hinge and mail it postage prepaid to: 

SALICE AMERICA Inc. 

2123 CROWN CENTRE DRIVE 

USA - CHARLOTTE NC 28227 

Enclose a brief letter explaining the defect with a copy of your proof of purchase. 

Allow approximately four (4) weeks for delivery of the replacement. 

ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED AS SET FORTH ABOVE. However, some states do not allow limitations on 

how long an implied warranty lasts, so the above limitation may not apply to you. WITH THE EXCEPTION OF ANY WARRANTIES 

IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING EXPRESS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ANY OTHER WARRANTIES OF SALICE WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROPS OR PARTS. 

IN NO EVENT SHALL SALICE BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE USE, 

INSTALLATION, PERFORMANCE OR FAILURE OF ITS PRODUCT. However, some states do not allow the exclusion of limitation of 

incidental or consequential damages, so the above exclusion may not apply to you. This limited warranty gives you specific legal rights 

and you may also have other rights which vary from state to state.

Summary of Contents for Paulo 249-16-9754

















Reviews: