4
SENSORS TO RECEIVER
Be careful not to activate your Sensor until you have
configured your Receiver and selected a tune.
Configuring your Sensor to your Receiver
1. Place your Sensor face down.
2. On the Receiver, press and hold the
MODE
button for
3 seconds until the lights on top flash.
3. There are 16 different tunes to select from. Press
the
SOUND
button until you have found a tune you
prefer.
4. Once you have found your preferred tune, wave your
hand in front of the Sensor which will configure the
two devices. A small beep will sound on the Receiver
to confirm the configuration.
5. Once configured, press and hold the
MODE
button
on the Receiver until the lights stop flashing.
6. To test the Kit, activate the Sensor which should
sound on your Receiver.
Configuring more than one Sensor to Receiver
Repeat the process above, selecting a different tune for
each Sensor to help you differentiate which Sensor has
been activated.
Configuring more than one Receiver to Sensor
Repeat the process above for each additional Receiver or
Pager.
