8
There are several "key points" to
L-bracket installation. Please review the
drawings and comments at right as well
as the assembly steps provided.
All units must be fastened to the wall.
Always mount L-bracket to a wall-stud.
installing L-bracket
short
end
long
end
wall
stud
Install short end against wall/wall
stud; long end against unit.
Do not install this unit flush against the
wall! This unit requires a gap of between
1/2 inch and 1 inch to install properly.
For more hidden hardware, secure L-bracket
under top panel. See step 10 for detailed
installation instructions.
Max.
1 in.
Min.
1/2 in.
wall
stud
top panel
wall
stud
Serious or fatal crushing injuries can occur
from furniture tip-over.
To help prevent tip-over:
- Install tip-over restraint provided.
- Unless specifically designed to
accommodate, do not set TVs or other
heavy objects on top of this product.
- Never allow children to climb or hang on
drawers, doors, or shelves.
- Place heavy items on lower shelves and as
far back as possible.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is a permanent label. Do not attempt to remove.
WARNING
