background image

6

safety precautions

 

warning

•  This unit contains small parts which could be a choking hazard for small children.  Children should be under adult supervision at all times or 

serious injury could occur.

•  Always unload unit prior to moving the unit.  The weight of personal belongings can cause the unit to become unstable and either tip or collapse.  

Serious bodily injury and/or damage to personal belongings may occur.

•  Do not overload unit.  If any shelf, top, or bottom of unit bows or bends, it is overloaded.  The shelf, top, or bottom could collapse and cause 

serious bodily injury and/or damage to personal belongings.

•  Do not climb or step on the unit.  This is not a bench.  The unit may become unstable and either tip or collapse.  Serious bodily injury and/or 

damage to personal belongings may occur.

•  Do not use this unit as a television stand.  Serious bodily injury and/or damage to personal belongings may occur.

•  Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip.  Serious bodily 

injury and/or damage to personal belongings may occur.

•  Do not stack units.  Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or damage to personal 

belongings.

•  Do not hang this unit on the wall.  The product structure is not designed for wall hanging.  Serious bodily injury, damage to personal belongings, 

and/or damage to the wall may occur.

•  All units must be secured individually to wall stud using hardware provided.  If wall stud is not accessible, consult your local hardware store for 

appropriate mounting hardware.  Failure to do so may create an unsafe tipping hazard that could lead to serious bodily injury and/or damage to 

personal belongings.

•  Follow proper safety procedures if using power tools and ladders.

•  We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.

•  We recommend you hand-tighten screws. Use care not to overtighten if using power tools.

Summary of Contents for 4274

















Reviews: