background image

WARNING 

Serious  or  fatal crushing  injuries  can occur 
from  furniture  tip-over.  To  help  prevent 
tip-over: 

• 

Install  tip-over restraint provided. 

• 

Place  heaviest  items 

in 

the  lowest  drawers. 

• 

Do not  set  TV's or  other  heavy objects on  top 

of this product,  unless the product  is 
specifically designed  to accommodate them. 

• 

Never allow children to climb  or hang on  drawers, 

doors,  or  shelves. 

• 

Never open more than one  drawer at  a  time. 

(OR) 

• 

Do not defeat or remove the  drawer  interlock 

system. 

Use  of  tip-over  restraints  may  only reduce, 
but not eliminate,  the risk  of tip-over. 

This is a permanent label.  Do  not remove. 

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in    

excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury. 

2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.

14

QUESTIONS? 

Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.  

55 lbs. 

40 lbs. 

30 lbs. 

Summary of Contents for 249-16-4845

















Reviews: