background image

10

WARNING

Please read this manual carefully and follow the instructions step by step. These
instructions generally show you how to install a car audio system, but they do not
explain the specific installation methods for your type of car.

Protracted listening at very high volume level may cause permanent hearing damages:
we recommend to not exceed with high volume. High-powered car audio systems
may produce pressure levels which exceed the limits of legislations in some countries:
please respect such rules of your country. We also recommend the use of a moderate
volume level while driving: you must always be able to hear external noises in order

to face possible emergency situations promptly.

A car audio system gives its best performances only if correctly installed: for this
reason, a good car's acoustical and mechanical knowledge are required. To ensure
total safety, we strongly recommend you to entrust installation to a qualified personnel,

respecting the current safety laws.

Coral Electronic declines any liability for damages caused to people and things in
disregarding the contents of the present manual and/or concerning the improper use
of its products.

INSTALLATION

Before starting the installation, take your time for a careful planning: a car audio system can

give the best performances only if correctly installed and tuned.

Carefully check that the amplifier never interferes with your total driving safety.

Make sure that the amplifier is not mounted near hot components and it has sufficient

ventilation, away from dust, moisture and moving objects.

Fix the amplifier on a steady surface, check the mounting location carefully, to avoid damages
to the gas tank, electrical wires or hydraulic pipes.

In order to avoid possible damages, before starting connections, turn off the
car radio and all electrical devices in your audio system.

Summary of Contents for TDA 270

















Reviews: