E-4
OPERATING INSTRUCTIONS
1. POWER ON/OFF
By pressing this key, the unit is switched on and off.
This unit is turned on by pressing any key.
2. SELECT
3. VOLUME UP/DOWN
Turning the VOL knob Right or Left (3), you can adjust VOL/BASS/TREB/BAL/FAD. To
select other functions, press the SEL (2) button shortly until the desired functions is shown
on the display. Figure 1 shows how control functions are selected using the SEL button.
Fig. 1 Selection of sound control functions
1. VOL 2. SEL 3. BAS 4. TRE 5. BAL 6. FAD
Turning the VOL knob Right or Left. Increase or decrease the volme by turning
VOL
or
VOL
.
These buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
AUDIO DSP CONTROLS (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
ESP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as 12 sec. or 45 sec. of
ESP mode can be selected.
MULTI CD SECTION MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
CD MULTI ON/OFF mode is selected by
VOL
or
VOL
key. CD MULTI ON: Read multi
section CD. CD MULTI OFF: Read first section only.
BEEP MODE (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of
these function.
BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.
1
3
2
4
2
5
2
6
2
2
DSP
SEL
2 sec.
POP M --- ROCK M --- CLASS --- FLAT M --- DSP OFF
VOL
ESP 12s. / 45s.
DSP
SEL
2 sec.
SEL
ESP
VOL
CD MULTI ON/OFF
DSP
SEL
2 sec.
SEL
MULTI
ESP
SEL
VOL
ESP
SEL
DSP
SEL
BEEP
SEL
2 sec.
SEL
MULTI
BEEP ON/OFF
VOL
