Targa SilverCrest SSM 300 B1, User Manual And Service Information

Page: 13 / 80

SilverCrest SSM 300 B1
English - 11
10. Storage when not in use
If the stick blender is not to be used for an extended period, store it in a clean and dry place out of the
reach of children.
11. Troubleshooting
If your stick blender does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty information"
section).
The stick blender does not work.

The mains plug is not plugged in. Insert the mains plug into a mains socket.

The mains socket is defective. Test the appliance in a different mains socket that you are certain is
working.
The blades do not turn / turn slowly

The motor unit (3) and the purée attachment (4) are not fitted together correctly. Disconnect the device
from the mains and check the fitting.

Is there an obstacle in the mix container? Remove it.

The food you are mixing is too hard or too tough.
12. Environmental regulations and disposal information
Devices marked with this symbol are subject to the European Directive 2012/19/EU. All
electrical and electronic devices must be disposed of separately from household waste at
official disposal centres. Avoid damage to the environment and risks to your personal health
by disposing of the device properly. For further information about proper disposal, contact
your local government, disposal bodies or the shop where you bought the device.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
13. Conformity notes
This appliance has been approved for compliance with the basic and other relevant
requirements of the Low-voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU,
the ErP Directive 2009/125/EC and the RoHS Directive 2011/65/EU.
In order to receive the complete EU declaration of conformity, please send an e-mail to the following
e-mail address: ce@targa.de