Targa PL8500S, User Manual, Page: 12 / 67

PowerLAN Starter Set PL8500S
11
Proper use
The device must not be used outside closed rooms and in tropical climate regions.
These rooms should be sufficiently ventilated according to the manufacturer's
instructions. Slits and openings on the housing are for purposes of ventilation and
must not be blocked or covered. Only use connection cables and external devices
that comply with safety requirements, electromagnetic compatibility requirements and
shielding quality of the device. Never insert anything into the device openings. This
device meets all the relevant norms and standards related to CE conformity. If
modifications are made to the device without the manufacturer's agreement,
adherence to these standards is no longer guaranteed. Only use the accessories
specified by the manufacturer. If you are not using the device within the Federal
Republic of Germany, national directives and laws of the country you are in must be
observed.
Conformity
The device has been tested and approved with regard to compliance
with the basic requirements and other relevant provisions of the EMC
Directive 89/336/EWG as well as the Low Voltage Directive
2006/95/EC.
Disposal of used devices
The devices marked with this symbol are subject to European Directive
2002/96/EC. All used electric and electronic devices must be disposed of
separately from domestic waste through collection points provided for by
the state. The correct disposal of the used device avoids environmental
damage and personal health hazard. Further information about the
correct disposal of the used device can be obtained from the local
authorities, waste disposal office or where you bought the product.