Targa DRH-5600x, User Manual And Service Information

Page: 13 / 64

12
Connecting to the antenna
Remove the antenna cable plug from your TV set and
insert it into the antenna socket at the back of the
recorder. Plug one end of the antenna cable into the
TV socket on the recorder and the other end into the
antenna input socket on your TV set.
RF coaxial connection
Connect the ANTENNA OUT jack on the recorder to
the antenna input jack on the TV using the 75-ohm
Coaxial Cable supplied (R). The ANTENNA OUT jack
passes the signal through from the ANTENNA IN jack.
ANTENNA
INPUT
Aerial
Rear of the recorder
Rear of TV
L
R
AUDIO INPUT
VIDEO
INPUT
SCART INPUT
R
1 ANTENNA IN
Connect the antenna to this terminal.
2 COMPONENT OUTPUT (Y P
B
P
R
)
Connect to a TV with Y P
B
P
R
inputs.
3 AV 2 DECODER SCART jack
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
4 HDMI OUTPUT (Type A)
HDMI output providing a high quality interface for
digital audio and video.
5 AC Power Cord
Plug into the power source.
6 ANTENNA OUT
Passes the signal from the ANTENNA IN jack to
your TV/monitor.
7 OPTICAL (Digital audio output jack)
Connect to digital (optical) audio equipment.
8 COAXIAL (Digital audio output jack)
Connect to digital (coaxial) audio equipment.
9 S-VIDEO OUTPUT
Connect to a S-Video Input on TV.
10 AUDIO OUTPUT (Left/Right)
Connect to a TV with audio inputs.
11 AV 1 SCART jack
Connect to a TV with SCART jack.
12 Ventilation holes
The ventilation holes guarantee sufficient cooling
in the interior of the housing. Never block the
ventilation holes.
1 2 3 4 5
6 7 8 9 10 11 12
Rear Panel
Hookup and Settings
Remote Control Operation
Point the Remote Control at the remote sensor and
press the buttons.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Remote Control Battery Installation
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA)
batteries
with and matched
correctly.