6
3.2
Electrical components
Tarasola cooperates with the best suppliers on the market in order to ensure the highest
level of offered products. Thanks to the electrical components used in our products, we are
offering a comprehensive product to our Clients - the best on the market.
Controlling a set of roller blinds may be done by:
•
the use of properly designed relay (TR) and switch systems.
•
single or multi-channel remote controller. The transmitters and receivers shall be
programmed in accordance with the installation manual supplied with the motors.
WARNING! Due to the complexity and specificity of the product, installation shall
be performed by qualified personnel. Any actions inconsistent with the guidelines may
cause a potential threat and void the warranty.
ELECTRIC MOTOR
A motor with a built-in radio receiver and an electric limiter. Secure coding
system. Simple programming and maneuvering. All operations are controlled by the motor,
and it works at low speed. Operation via remote or local controller.
Installation remarks
The protection rating of a motor installed outside stands at IP 44. However, if the switch shall
be installed internally then its protection rating may drop to IP 40. The voltage supplied to the
motor must be 230 V. The wiring must be insulated.
Motor connection diagram is presented below.
Fig.3 Electrical drive with remote control.
