OWNER'S MANUAL
TRUNK RELEASE
1. Press then HOLD the Trunk Button on the remote transmitter.
2. The park lights will flash and the SIREN will chirp two times.
3. The system will disarm, unlock the doors then open the Trunk.
4. The LEDs will stop flashing.
NOTES:
- For safety, the trunk release will not active when ignition key is ON.
** Optional Feature may require additional parts and labor.
PRESS & HOLD
1. Press and release the Lock Button on the remote transmitter.
2. The park lights will flash and the SIREN will chirp one time.
3. The alarm will arm and the doors will lock.
4. The LED will start flashing within five seconds.
5. The alarm will trigger at this point if the door is opened of if the shock sensor is
triggered.
- If the system is in Service Mode the doors will lock/ unlock but the SIREN will not chirp.
- The LEDs will stay on solid if the system is in Service Mode.
See Valet / Service Mode in this manual for further information
NOTES:
- If the alarm is activated pressing the lock button on the remote will stop the SIREN from
sounding and the alarm will stay armed.
** Optional Feature may require additional parts and labor.
The LEDs can be programmed not to flash when the system is armed/ door’s are
locked by the remote transmitter.
PRESS & RELEASE
ARS.1
