04
Knowing the LED 90 Power Supply
- Output power in
RMS
= 500W continuous.
- Maximum power of
Automotive Sound
= 1200W RMS (60A Dynamic 4 seconds).
The
LED 90
Power Supply is an automatic bivolt switched power supply. It has a digital
electronic circuit that controls and stabilizes its output, providing more security when
connecting your LED strips, cctv security cameras, car audio, radio communicators, among
others.
- Maximum input power: 800W (1.5mm² recommended wiring).
It has simple installation, not requiring any special connector.
- Protection against output short circuit: Turns off the output if a short is detected or a load far
above the permitted value is detected.
- Temperature Protection: Reduces power momentarily, returning automatically with a
decrease in temperature.
- Output activation time: 300ms (average).
07
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
1 - LED ON:
It stays on as long as the source / charger is connected to the mains.
2 – ADJ/VOLTAGE:
Ajust the output voltage from 8V to 14.5V.
For automotive battery recharge, it is recommended to set the output voltage greater than
13.8V.
3 - DC V:
To connect the positive (+) cables to the battery or 12 Volt equipment.
6 - POWER INPUT:
Use a 1.5mm² cable.
Power cable not included.
7 – COOLING FAN:
The cooler remains on according to the power supply status: By current or
temperature.
5 - GROUNDING:
To avoid possible electric shock, we recommend grounding the equipment.
IMPORTANT: Never obstruct the fan and leave a 20cm space on the sides.
4 - DC OUTPUT -V:
To connect the negative (-) cables to the battery or 12 Volt equipment.
ADJ
VOLTAGE
AUTOMATIC BIVOLT
~127V-220V
2
1
3
4
6
5
LED 90
1200 Watts
7
Dimensions (WxHxD): 119x58x157mm (4.69"x2.28"x6.18")
Weight: 0.69Kg (1.52lb)
