12
Rear Panel
1 - SPEAKER OUT:
To connect the loudspeakers. Follow the indicated polarity and the
recommended minimum impedance of 4 ohms for each channel.
3 - FM ANTENNA:
External antenna for better reception of FM signal.
2 - ENERGY CABLE
: Connect the cable to the power source. This product operates from 85V
AC à 265V AC 50Hz/60Hz.
Position the antenna in the best way to obtain FM reception.
Knowing your equipment
3
Protection System
Short-circuit protection
: Cut the audio signal if a short circuit or impedance lower than that
supported on the output is detected.
Do not block the ventilation holes to avoid overheating.
Note:
During constant use, moderate heating inside the product is normal.
Thermal protection:
If the heatsink temperature reaches high levels, the audio signal is
turned off. In this case, turn off the HOME 80W and wait until the temperature returns to a safe
operation level. (This will not happen if the amplifier is installed in an airy place and in a
correct way)
We recommend that you do not leave the product within the reach of children.
