08
Safety requirements
Introduction
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
This manual covers all features, operations and instructions to solve any doubt that may arise
during the installation. Please take some time to read it carefully in order to ensure the proper
installation and the use of all benefits that this product can offer.
It was developed in a modern laboratory and with the latest technology.
Congratulations on your purchase of a Taramps product.
For questions, please call
+55 (18) 3266-4050
or visit
www.taramps.com.br
.
-
Never install the amplifier in places exposed to dust, humidity and water. Pay attention to
install it far from fuel tank, fuel lines, heat sources and other parts of vehicle.
-
This amplifier must be installed in a firm place with at least 1” space around the heatsink for
proper heat spreading.
-
When in use, the external surface of may amplifier becomes hot. Avoid touching the heatsink
area and keep childrens far from the amplifier.
-
The installation of this amplifier must be done by a qualified professional.
-
If you want to dispose this amplifier, don't throw it on domestic waste. It must be collected by
an used electronic product disposal service for proper recycling.
-
Before make any connection to amplifier, disconnect the battery negative terminal.
-
Be sure to install protection fuse or a circuit braker near to battery. Follow the ampere rating
as indicated here in this manual. Use of improper fuse or circuit breaker could result in
overheat, smoke, damage to product, injury or burns.
-
Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect
any wires routed through car's body.
-
Wear safety glasses, insulated gloves and correct tools for installing this product.
-
Output connections for speakers may have voltage levels when the amplifier is operating.
Make sure that the amplifier is turned OFF before proceed any connection or disconnection in
this terminals.
-
This amplifier may produce high sound pressure levels. Avoid continuous exposure to levels
over 85dB to prevent permanent hearing loss.
To ensure proper use, please read through this manual before using the amplifier. It is
specially important that you know the
CAUTIONS
contained here.
-
This amplifier is for use with 12V batteries. Always check the voltage before installing.
As you read this manual, pay attention to the safety symbols.
This symbol with
“CAUTION”
is intended to alert the user to the presence of
important instructions. Failure to heed the instructions will result in risk of
injury to user or product damage.
Safety
CAUTION
