Key recommendations
Introduction
You can find below some key recommendations to get the most out of your amplifier:
1-
Read this instruction manual carefully before carrying out any connection;
Any connection to the amplifier input or output must be carried out when amplifier is
off;
2 -
Check carefully the polarity of power supply wiring (battery's positive and negative
terminals) loudspeakers and the minimum speaker impedance;
3 -
It is compulsory to install circuit breakers to protect against overloading. The circuit
breaker must be installed as close as possible to the battery and sized up according to the
amplifier;
4 -
The gauge of power supply wiring is extremely important both to reach the desired
amplifier output and to the amplifier's safety. Use the wire gauge recommended in this
manual (page 11). Using wire gauges below the specified value will result in power loss and
overheating of cables. It is important that the power supply cables are the shortest possible;
5 -
Amplifier must be installed in a firm and ventilated area;
6 -
In order to avoid interferences, the signal cable (RCA) must be away from the original
wiring of vehicle or from any other power supply cable;
7 -
The amplifier must be installed by a qualified professional.
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
Congratulations on your purchase of Taramps product.
It was developed in a modern laboratory and with the latest technology.
This manual covers all features, operations and instructions to solve any doubt that may
happen during the installation. Please take some time to read manual carefully in order to
ensure the proper installation and the use of all benefits that this product can offer.
For questions, please call
+55 (18) 3266-4050
or visit
www.taramps.com.br
.
08
Summary of Contents for Bass 400
Page 1: ......
