Tar River TXG Series, Operator'S Manual

Page: 14 / 40

14
Rotary Tiller TXG, YCT & YCT - R Series
Operating Instructions
Working Depth Adjustment
The working depth is controlled by raising or lowering the side skids. If the skids are raised, the working depth
increases. By lowering the skids, the tilling depth with decrease.
Tailgate adjustment
The tailgate can be adjusted to help smooth and compact the tilled ground. Release the chain and secure to the
desired height.
Start up
After making the necessary adjustments, lower the rotary tiller until the blades are a couple of inches from the
ground. Engage the PTO and slowly lower the tiller to begin working.
Removal and Storage
1. After finishing, remove the rotary tiller from the tractor.
2. Put the PTO driveline in a safe location so it will not become damaged.
3. Clean and dry the equipment.
4. Replace any damaged or worn parts.
5. Check all bolts and nuts for tightness.
6. Lubricate and protect the machine from the elements.
•
Following operation, or when unhitching, stop the tractor or towing vehicle, set the brakes,
disengage the PTO and all power drives, shut off the engine and
remove the ignition keys .
•
Store the unit in an area away from human activity.
•
Do not park equipment where it will be exposed to livestock for long periods of time.
Damage and livestock injury could result.
•
Do not permit children to play on or around the stored unit.
•
Make sure all parked machines are on a hard, level surface and engage all safety
devices.
•
Wheel chocks may be needed to prevent unit from rolling.
Following Operation