Tar River ERC Series, Operator'S Manual

Page: 15 / 36

15
ERC Square Back Rotary Cutter
Adjusting the Tractor Top Link - Transport Position (Fig. 4A)
When transporting the ERC Rotary Cutter, adjust the Tractor Top Link as shown in Fig. 4. making sure the U -
bracket is parallel to the ground.
This position will help prevent the rotary cutter from bouncing causing damage to the implement or tractor.
The rotary cutter should not be lifted any higher than 15 - 20” off the ground.
Never transport the rotary cutter with the PTO engaged and blades rotating!
When raising the rotary cutter for transport, make sure the PTO does not strike the tractor or the rotary cutter.
Always transport the rotary cutter at a safe speed. Obey federal, state and local laws when on public highways.
Adjustments
Tractor Top Link
U - bracket is rigid
Ground Level
Tractor Top Link
U - bracket in float
Ground Level
Transport Position
Float Position
Fig. 4A
Adjusting the Tractor Top Link - Float Position (Fig. 4B)
Adjust the Tractor Top Link by twisting it to relax the U - bracket so it ’ s pointing towards the ground similar to
the illustration. The Tail Wheel should be resting on the ground.
In this position the rotary cutter will (float) follow the contour of the ground.
Fig. 4B
Tractor Lower Arms
Tractor Lower Arms