Finishing installation
Your unit should now be fully plumbed and ready to use.
NOTES TO THE INSTALLER – BEFORE YOU LEAVE
1
Having programmed your unit you will wish to ensure that the
unit is functioning properly before you leave the site.
2
Our Service Department will offer you advice. If you have any
queries do not hesitate to call us.
3
Open the inlet and outlet valve and close the bypass as
indicated in the diagram (page 6). Check that all the
plumbing connections are secure and that there are no leaks.
4
Check that the time of day is correct.
5
Initiate a recharge
Hold down the
TOUCH/HOLD
button for about 3 seconds
until
RECHARGE
flashes in the display. After a few minutes a
small amount of water will enter the salt cabinet. This process
will take approximately 4-8 minutes.
FILL WITH SALT
6
Once the water has run to drain,fill the cabinet with salt and
check your drain connections. You will require a 25kg bag of
Pellet salt or Tablet salt. DO NOT use granular salt. Make sure
that the brine well cover is in place and secure as salt must not
be allowed to enter the brine well. Do not fill salt above the
overflow. (See unit explosion diagram page 2).
7
The whole recharge procedure will take approximately 1 hour.
Once complete softened water will gradually replace the hard
water in the storage tank over a period of normally 7 days.
However, this can take longer in larger houses.
8
Advise the customer that any water fed from the storage tank
will not be softened immediately. Any water drawn directly from
the softener following recharge will be soft.
9
Ensure that the customer is left with all literature relating to the unit.
10
Return the Guarantee Registration Card to Tapworks.
IMPORTANT – TAPWORKS WATER SOFTENERS HAVE
12 MONTHS PARTS & LABOUR WARRANTY. YOU CAN
EXTEND THIS TO 2 YEARS BY RETURNING THE GUARANTEE
REGISTRATION CARD. WE WILL SEND YOU (WITHIN 28
DAYS) YOUR WARRANTY CERTIFICATE DETAILING YOUR
2 YEAR GUARANTEE.
If you are a regular user of water softeners you will benefit from joining
Team Tapworks.
Call 01494 480 621 for details. Thank you for choosing
Tapworks.
Programming the AD11 & AD15 Faceplates
Please Remember
–
Only use tablet or pellet salt in your softener!
27
