background image

minutes and seconds from left to right so a 

single digit can be set (5 for 5 seconds) or up 

to 4 digits (2405 for 24 minutes 5 seconds). 

3.  Touch START pad. 

 

SETTING “WEIGHT DEFROST” 

Suppose you want to defrost 600g shrimp. 

1.  Touch WEIGHT DEFROST pad 3 times. “d3” 

will appear in the display. 

2.  Touch number pads 6,0,0. 

3.  Touch START pad. 

NOTE: The maximum allowable weight for each 

category is shown below: 

 

FOOD 

CATEGORY 

MAXIMUM 

WEIGHT 

DISPLAY 

Meat 2300g d1 

Poultry 4000g  d2 

Seafood 900g  d3 

 

For foods exceeding these maximum weights, use 

the JET DEFROST program. If you program weight 

in excess of the maximum recommended, the oven 

will not operate properly. 

     

PROGRAM COOKING 

The oven has the ability to be programmed to do 

several consecutive functions. 

Suppose you want to set the following cooking 

program: 

c

 JET DEFROST; 

d

. 1

st

 stage: Cook for 5 minutes at 100%; 

e

 2

nd

 stage: Cook for 10 minutes at 50%. 

Step:   

1. Touch CLEAR pad. 

 

 

2. Input jet defrost program. 

 

 

3. Input time (5 minutes) and power 

 

 

    level (100%) cooking program. 

  4. 

Touch 

MEMORY 

pad. 

 

 

5. Input time (10 minutes) and power 

 

 

  level  (50%) cooking program. 

6. Touch START pad. 

NOTE

: JET DEFROST and WEIGHT DEFROST 

can only be selected before the cooking stage in a 

program. It can not be selected between or after 

stage 1 or stage 2. 

 

SETTING “SAFETY LOCK” 

The safety lock prevents unsupervised operation by 

little children. To set, press and hold number pads 5 

and 7 for 3 sec, a beep sounds and LOCK indicator 

lights. To cancel, press and hold number pads 5 and 

7 for 3 sec, a beep sounds and LOCK indicator goes 

off. 

TO STOP THE OVEN WHILE THE OVEN   

IS OPERATING 

  Open the door. 

·

You can restart the oven by closing the   

door and touching START pad. 

    NOTE: 

·

Oven stops operating when door is opened. 

 

 

 

 

 

12

Summary of Contents for TM5030B
















Reviews: